Guides

What’s separating good for if everything is then incinerated anyway?

About half of the collected plastic packaging is materially re-utilised, i.e. processed into re-granules from which new products can then again be made. Only the mixed plastic fraction containing heavily soiled and rather small-part packaging parts is mostly destined for thermal dressing. Yet, “thermal dressing” does not mean that the material is eventually dumped in a garbage incineration plant. The plastic parts are disintegrated and used in Austria as alternative fuel instead of coal or oil in the cement industry and the RVL Lenzing for energy generation. In both utilisation processes, natural resources are saved.

What should be put in the yellow bin or yellow sack?

Yellow bins and yellow sacks are only for plastic packaging and nothing else!

What to put in:

All types of plastic film

  • Plastic bottles (e.g. for drinks, washing-up liquid, cleaning products)
  • Plastic tubes (e.g. for toothpaste)
  • Plastic lids and caps
  • Yoghurt pots and cups
  • Plastic bags
  • Margarine tubs
  • Canisters
  • Plastic mesh (e.g. for onions, lemons)
  • Cellophane packaging
  • Frozen food packaging (plastic-coated containers)
  • Blister packaging (e.g. for medicines)
  • Fruit trays
  • Meat trays (foamed packaging)
  • Styrofoam packaging (packing chips)
  • Moulded plastic packaging (e.g. inside chocolate boxes)
  • Foamed rubber packaging
  • Milk and drinks cartons, if there is no suitable collection system with an Öko-Box

What not to put in:

  • All non-plastics
  • Nappies
  • Construction plastics (e.g. pipes)
  • Plastic clothing (e.g. boots)
  • Plastic bowls, baskets and other kitchen utensils
  • Electronic items (e.g. power cables, sockets)
  • Children’s toys
  • Medical items (e.g. infusion equipment)
  • Small plastic parts (e.g. plastic sleeves from the office)

Is it necessary to clean collected plastics before disposing them in the “yellow container” or the “yellow bag”?

Since the sorted plastics are cleaned anyway in the processing plants after disintegration, it is sufficient to completely empty or just rinse plastic packaging.

What is granulate / regranulate?

Plastic granules (granulate) are the basic product from which plastic products are made. New plastics are usually supplied to processors in the form of granules. Regranulate refers to recycled plastic from production waste. IMPORTANT: Regranulates should not be confused with recyclates. Unlike regranulates, recyclates come from post-consumer waste, i.e. plastic that has already passed through one complete ‘life cycle’.

What are recyclates?

Secondary raw materials that can be used to make high-quality new products Our basic idea – and primary aim – is to convert plastic waste back into the products it once was. We recycle around 28 000 tonnes of polyethylene waste every year, transforming it into high-quality recyclates. Recyclates are recycled plastics from post-consumer waste – plastics that have been disposed of with household or commercial waste at least once after being used. Secondary raw materials, or recyclates, are produced in a multi-stage production process. Recyclates are produced using hot or cold washing, while granules are produced without the washing stage.

In most cases our recyclates can be used to manufacture products the same as or similar to the original products prior to disposal, completing the recycling loop.

Types of plastics

PET PETP (polyethylenterephthalate) is light-weight, stiff, rigid, fracture-proof, aroma-tight and transparent like glass. Collected and ground PETP bottles are a sought-after basic material for the manufacture of a great number of different products.

PET-Bottles

 

HDPE HDPE (high-density polyethylene) is harder and stiffer than LDPE (low-density polyethylene). Withstanding higher temperatures and highly resistant against chemicals, it is used for all kinds of bottles (shampoo, detergents, etc.) as well as for cans, buckets and beverage boxes.

HDPE packaging

 

LDPE LDPE (low-density polyethylene) is the most used plastic material for packaging, e.g. for all kinds of foils and plastic bags. LDPE is extremely resistant against chemicals, almost tight against water vapour and is odourless and taste-neutral.

LDPE packaging

 

PP PP (Polypropylene) is oil and grease resistant. It has a very low permeability for water and oxygen. Consequently, it lends itself for packaging margarine, edible oils, mayonnaise, ketch-up, mustard, salad dressings, savoury biscuits, bread, cakes and pastries. In most cases, screw caps of PET and HDPE bottles are made of polypropylene.

PP packaging

 

r6 PS (polystrene) is used above all for yoghurt and cream pots.

PS pots

 

r6 EPS (expanded polystrene) is known under the trade name “Styropor”. Used as packaging material it protects fragile products and devices susceptible to shocks.

EPS ground material

Recycling-Lexicon

What’s separating good for if everything is then incinerated anyway?

About half of the collected plastic packaging is materially re-utilised, i.e. processed into re-granules from which new products can then again be made. Only the mixed plastic fraction containing heavily soiled and rather small-part packaging parts is mostly destined for thermal dressing. Yet, “thermal dressing” does not mean that the material is eventually dumped in a garbage incineration plant. The plastic parts are disintegrated and used in Austria as alternative fuel instead of coal or oil in the cement industry and the RVL Lenzing for energy generation. In both utilisation processes, natural resources are saved.

What should be put in the yellow bin or yellow sack?

Yellow bins and yellow sacks are only for plastic packaging and nothing else!

What to put in:

All types of plastic film

  • Plastic bottles (e.g. for drinks, washing-up liquid, cleaning products)
  • Plastic tubes (e.g. for toothpaste)
  • Plastic lids and caps
  • Yoghurt pots and cups
  • Plastic bags
  • Margarine tubs
  • Canisters
  • Plastic mesh (e.g. for onions, lemons)
  • Cellophane packaging
  • Frozen food packaging (plastic-coated containers)
  • Blister packaging (e.g. for medicines)
  • Fruit trays
  • Meat trays (foamed packaging)
  • Styrofoam packaging (packing chips)
  • Moulded plastic packaging (e.g. inside chocolate boxes)
  • Foamed rubber packaging
  • Milk and drinks cartons, if there is no suitable collection system with an Öko-Box

What not to put in:

  • All non-plastics
  • Nappies
  • Construction plastics (e.g. pipes)
  • Plastic clothing (e.g. boots)
  • Plastic bowls, baskets and other kitchen utensils
  • Electronic items (e.g. power cables, sockets)
  • Children’s toys
  • Medical items (e.g. infusion equipment)
  • Small plastic parts (e.g. plastic sleeves from the office)

Is it necessary to clean collected plastics before disposing them in the “yellow container” or the “yellow bag”?

Since the sorted plastics are cleaned anyway in the processing plants after disintegration, it is sufficient to completely empty or just rinse plastic packaging.

What is granulate / regranulate?

Plastic granules (granulate) are the basic product from which plastic products are made. New plastics are usually supplied to processors in the form of granules. Regranulate refers to recycled plastic from production waste. IMPORTANT: Regranulates should not be confused with recyclates. Unlike regranulates, recyclates come from post-consumer waste, i.e. plastic that has already passed through one complete ‘life cycle’.

What are recyclates?

Secondary raw materials that can be used to make high-quality new products Our basic idea – and primary aim – is to convert plastic waste back into the products it once was. We recycle around 28 000 tonnes of polyethylene waste every year, transforming it into high-quality recyclates. Recyclates are recycled plastics from post-consumer waste – plastics that have been disposed of with household or commercial waste at least once after being used. Secondary raw materials, or recyclates, are produced in a multi-stage production process. Recyclates are produced using hot or cold washing, while granules are produced without the washing stage.

In most cases our recyclates can be used to manufacture products the same as or similar to the original products prior to disposal, completing the recycling loop.

Types of plastics

PET PETP (polyethylenterephthalate) is light-weight, stiff, rigid, fracture-proof, aroma-tight and transparent like glass. Collected and ground PETP bottles are a sought-after basic material for the manufacture of a great number of different products.

PET-Bottles

 

HDPE HDPE (high-density polyethylene) is harder and stiffer than LDPE (low-density polyethylene). Withstanding higher temperatures and highly resistant against chemicals, it is used for all kinds of bottles (shampoo, detergents, etc.) as well as for cans, buckets and beverage boxes.

HDPE packaging

 

LDPE LDPE (low-density polyethylene) is the most used plastic material for packaging, e.g. for all kinds of foils and plastic bags. LDPE is extremely resistant against chemicals, almost tight against water vapour and is odourless and taste-neutral.

LDPE packaging

 

PP PP (Polypropylene) is oil and grease resistant. It has a very low permeability for water and oxygen. Consequently, it lends itself for packaging margarine, edible oils, mayonnaise, ketch-up, mustard, salad dressings, savoury biscuits, bread, cakes and pastries. In most cases, screw caps of PET and HDPE bottles are made of polypropylene.

PP packaging

 

r6 PS (polystrene) is used above all for yoghurt and cream pots.

PS pots

 

r6 EPS (expanded polystrene) is known under the trade name “Styropor”. Used as packaging material it protects fragile products and devices susceptible to shocks.

EPS ground material